3com 5012 Manual De Usuario
3Com Router 5000/6000 Family
93
Command Reference
limit
Use the
limit
command to create rule under corresponding connection limit policy.
Connection Limit Policy view
line
Use the
line
command to associate the voice entity with a specified voice subscriber-line.
POTS Voice Entity view
line
Use the
line
command to configure the corresponding relationship between the POTS voice entity and the
logic subscriber line.
POTS Voice Entity view
link-protocol
Use the
link-protocol
command to set the link layer protocol of the interface.
POS Interface view
link-protocol fr
Use the
link-protocol fr
command to encapsulate interface link layer protocol as Frame Relay.
Interface view
link-protocol fr mfr
Use the
link-protocol fr mfr
command to configure the current physical interface as an MFR bundle link
and bundle it onto a specified MFR interface.
Interface view
link-protocol hdlc
Use the
link-protocol hdlc
command to configure the interface encapsulation as HDLC.
Interface view
link-protocol lapb
Use the
link-protocol lapb
command to specify the link layer protocol of the interface as LAPB.
Interface view
link-protocol ppp
Use the
link-protocol ppp
command to configure the link-layer protocol encapsulated on the interface as
PPP.
Interface view
link-protocol sdlc
Use the
link-protocol sdlc
command to change the link layer encapsulation protocol of the synchronous
serial interface into SDLC.
Synchronous Serial Interface view
link-protocol slip
Use the
link-protocol slip
command to set the link layer protocol of the interface as SLIP.
Interface view
link-protocol sot
Use the
link-protocol sot
command to encapsulate the serial interface with SOT.
Synchronous Serial Interface view
link-protocol x25
Use the
link-protocol x25
command to encapsulate X.25 protocol to the specified interface.
Interface view
llc2 max-ack
Use the
llc2 max-ack
command to configure the length of the advance response window before the LLC2
sending the acknowledgement frame.
Ethernet Interface view
llc2 max-send-queue
Use the
llc2 max-send-queue
command to configure the queue length sending the LLC2 packet.
Ethernet Interface view
llc2 max-transmission
Use the
llc2 max-transmission
command to configure the retransmission times of the LLC2.
Ethernet Interface view
llc2 modulo
Use the
llc2 modulo
command to configure the modulus of the LLC2.
Ethernet Interface view