Clarion CZ309 Guía Del Usuario

 

CZ309

● Adjusting the subwoofer output 

You can adjust the volume output from the unit’s 
subwoofer output terminal.

This adjustment can be performed only when 
the “S-W LPF” is set to “LPF 120”, “LPF 80” or 
“LPF 50”.

2-1. Select “S-W VOL”.

3-1. Press the [

w] or [z] button to increases 

or decreases the subwoofer volume.

∗ The factory default setting is 

“0

”. 

(Adjustment range: +6 to –6)

∗ When the volume level is more than 30, the 

subwoofer volume adjustment value can not 
reach +6.

● Adjusting the high pass filter

2-1. Select “HPF”.

3-1. Each time you press the [

w] or [z] button 

to select the setting.

The setting changes in the following order: 
“120” 

↔ “THROUGH”

∗ The factory default setting is “THROUGH” 

(through).

∗ This is supported only with amplifiers 

equipped with this function. Output is not 
supported from RCA cables.

The MAGNA BASS EXTEND does not adjust 
the low frequencies like the normal sound 
adjustment function, but emphasizes the deep 
bass frequencies to provide you with a dynamic 
sound.

∗ The factory default setting is “OFF” (off).

1. Press and hold the [SOUND] button for 1 

second or longer to turn on the MAGNA 
BASS EXTEND effect. “M-B EX” appears in 
the display for 2 seconds.

2. Press and hold the [SOUND] button for 1 

second or longer to turn off the MAGNA 
BASS EXTEND effect.

1. Press the [SRC] button and select the radio 

mode. 

2. Press the [BND] button and select the radio 

band. Each time the button is pressed, the 
radio reception band changes in the 
following order:

F1 (FM1) 

➜ F2 (FM2) ➜ F3 (FM3) ➜ AM ➜ 

F1 (FM1)...

There are 3 types of tuning mode available, 
seek tuning, manual tuning and preset tuning.

1. Press the [BND] button and select the 

desired band (FM or AM).

∗ If “MANU” is lit in the display, press and hold 

the [BND] button for 1 second or longer. 
“MANU” in the display goes off and seek 
tuning is now available.

2. Press the [

x] or [v] button to 

automatically seek a station.

There are 2 ways available: Quick tuning and 
step tuning. 
● Quick tuning
Press and hold the [

x] or [v] button for 1 

second or longer to tune in a station.
● Step tuning
Press the [

x] or [v] button to manually tune 

in a station.

A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio 
stations in memory. Press the corresponding 
[DIRECT] button or the [w] / [z] button to 
recall the stored radio frequency automatically.

1. Select the desired station with seek tuning or 

manual tuning.

DXZ385USB_ENG.book  Page 11  Friday, October 17, 2008  1:52 PM