Xerox 2101 Guía Del Usuario

1.3 Using the Touch Panel Display

1

Touch panel display

Displays the respective features and machine status.
Touch this panel directly to select the features and instructions displayed.

2

Job Status button

Press to check the presently processed job.
On the Job Status screen, once a job is selected, you can pause it if it is being 
scanned or delete it if is paused. When printing multiple jobs, you can 
promote a print job over ones that are waiting to be printed. The promoted job 
is printed following the job that is currently being printed.

3

System  Settings/
Meter Check button

For the system administrator to press to define the specifications of the copier 
features, or to check the meter reading or status of the consumables.

● To use the Tools Mode and the Auditron Administration Mode, switch to the

4

Power Saver button

Press to put the machine in the Power Saver mode if it is not to be used for a 
while to reduce power consumption.
The Power Saver indicator light will be lit if it is in Power Saver mode. To 
return to the Ready (Copy) mode, press the button again.

5

Password button

Press to display the Password Entry screen if the Auditron Mode is enabled. 
Use of the machine can be controlled by requiring each user to enter his 
password (by department/user).

6

Review button

Press to check the copy settings.
You can check the status of the settings displayed on the screen.
In the Copy, Save to File, Copy and Save modes, you can check copy settings 
before pressing the Start button. You can also check the copy settings of a 
selected job from the list on the Job Status screen.
In the Edit/Print Files mode, you can check the copy settings of the selected 
copy file when saved.

7

Clear All button

Press to clear all settings and return to the default screen. The default screen 
is the screen that is displayed when the machine is switched on.

8

Volume adjustment dial

Turn to set the volume of error tones to inform you of a completed copy job or 
a machine fault. Adjust by rolling the dial to the left or right.

● You can also set the tone off. For details, refer to “Setting Tone” in ““8.2

9

Keypad

Use the keys on this keypad to enter numeric values, such as the number of 
sets to be copied.

10

C (Clear) button

Press to delete or correct a wrong entry made by using the keypad.

11

Start button

Press to start copying.

12

Interrupt button/indicator

Press to interrupt the current copy job for an urgent job. The indicator light on 
the left lights up when this button is pressed.
Press again to cancel the interrupted copy job and return to the original copy 
job.

13

Stop button

Press to stop the current copy job.