Xerox 6300 Guía Del Usuario
Windows NT 4.x
Phaser® 6300/6350 Color Laser Printer
4-12
Other Methods of Installation
Install your printer on a Windows NT 4.x network using Microsoft TCP/IP Protocol.
To monitor or configure your printer, use CentreWare IS with a web browser if your printer is
connected to a Windows NT 4.x network with TCP/IP protocol enabled.
connected to a Windows NT 4.x network with TCP/IP protocol enabled.
Note:
The CentreWare methods are not discussed in this section.
See also:
on page 4-2 (CentreWare IS)
Quick Install Steps (Microsoft TCP/IP Protocol)
Note:
This procedure is only performed by the system administrator.
To install the Microsoft TCP/IP Printing software:
1.
Right-click the My Network Places icon on the desktop, and then click Properties.
2.
Select the Protocols tab to verify that the TCP/IP protocol has been installed.
3.
Select the Services tab and verify that Microsoft TCP/IP Printing software is installed. If it
is not installed, install it, and then return to this document.
is not installed, install it, and then return to this document.
Adding the Printer
To add the printer:
1.
Open the Control Panel, and then double-click the Printers icon.
2.
Double-click Add Printer to launch the Add Printer Wizard, and then click Next.
3.
Verify that My Computer is selected, and then click Next.
4.
Click Add Port, and then select the LPR Port from the list displayed.
5.
Click New Port.
6.
Enter the IP address for your printer and a printer name of 31 characters or less (no
spaces).
spaces).
7.
Select OK.
8.
Verify that the new IP address you entered is listed correctly. If the check box next to the
IP address is not checked, select the check box, and then click Next.
IP address is not checked, select the check box, and then click Next.