Xerox 6300 Guía Del Usuario

To select a Tray 1 (MPT) behavior setting on the control panel:

Select 

, and then press the OK button.

Select 

, and then press the OK button.

Select 

, and then press the OK button.

Select the appropriate behavior setting, and then press the OK button.

To select a Tray 1 (MPT) behavior setting using CentreWare IS:

Launch your web browser.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

Click Properties.

Select the General folder on the left sidebar, and then select Printer Defaults.

Select the appropriate behavior setting in the Tray 1 (MPT) Behavior drop-down list.

Click the Save Changes button at the bottom of the page.

The Tray 1 (MPT) prompt setting specifies the amount of time the prompt displays on the 
control panel after paper is loaded in Tray 1 (MPT). The Tray 1 (MPT) prompt asks the person 
that loaded the paper to confirm the current tray setup or to specify the paper type and size.

To select a Tray 1 prompt timeout, use either:

■

The printer’s control panel

■

CentreWare IS

To change the Tray 1 (MPT) Prompt Timeout on the control panel:

Select 

, and then press the OK button.

Select 

, and then press the OK button.

Select 

, and then press the OK button.

Select the appropriate prompt setting, and then press the OK button.

Turns the tray setup prompt off.

Displays the tray setup prompt for 30 seconds after paper is loaded in Tray 1 (MPT).

Displays the tray setup prompt after paper is loaded in Tray 1 (MPT) until a control panel 
selection is made.