Xerox 123 Manual De Usuario

TEL
Located on the back of the machine. Connect a telephone to this jack if required.

LINE 1
Located on the back of the machine. Connect a telephone cable to this jack. Then 
connect the other end to the wall jack.

Finisher
Allows you to staple or sort copies automatically. The Finisher Tray can hold 1,000 
sheets of 20 lb bond or 80 g/m

2

 paper in Letter/A4 size or smaller.

Duplex Module
Allows you to make double-sided copies. The Duplex Module can be used when paper 
is supplied from Tray 1, 2, 3, or 4. For more information, refer to 2 Sided in the Copy 
chapter on page 53.

Trays 3 & 4
At the base of the machine, the following optional trays will be available, depending on 
the configuration.

• Two Tray Module – Can be added to the standard 2-tray configuration. Each tray 

can hold 500 sheets of 20 lb bond or 80 g/m

2

 paper.

• Tandem Tray Module – Can be added to the standard 2-tray configuration to provide 

high volume paper sources. Tray 3 can hold a maximum of 800 sheets of 20 lb bond 
or 80 g/m

2

 paper in Letter or A4 size, long edge feed. Tray 4 can hold 1,200 sheets 

of 20 lb bond or 80 g/m

2

 paper in Letter or A4 size. The Tandem Tray Module is 

referred to as “TTM” in this manual.

Finisher Tray

Finisher (Optional)

Tandem Tray Module (Optional)

Tray 3

Tray 4