Xerox 128 Manuales De Servicio

Two processor feeder/paper trays (trays 1 and 2) are located in 
the main part of the printer.

Trays 1 and 2 can handle paper sized from 8 by 10 inches / 203 by 
254 mm to 9.02 by 14.02 inches / 230 by 356 mm.

Depending on your configuration, the feeder/paper trays have the 
following capacities, based on 20 pound or 80 gsm (grams per 
square meter) paper: 

Tray 1: 1100 sheets

Tray 2: 600 sheets

Trays 3, 4, 5, and 6 (high-capacity trays): 2600 sheets each

An elevator moves each tray up or down when it is in use. In each 
tray, a control panel consisting of a button, indicators, and paper 
level displays controls the elevator tray and indicates its status.

1. Ready to Open indicator

2. Please Wait indicator

3. Tray Unlock button

4. Paper Level indicators

Glows green when the tray can be pulled out and paper can be 
added to it.

Shows that the tray is in motion. This indicator is lit red when the 
Tray Unlock button is pressed, while the tray is lowering, and while 
the tray is rising. The indicator goes off when the tray elevator 
reaches its destination.

Enables the tray to be opened.

•

If the tray is in use when this button is pressed, the feed 
selection switches to the backup tray if one has been 
identified. Otherwise, printing stops.

•

If the tray is in use and selected as a backup tray, pressing the 
Tray Unlock button causes the tray elevator to lower and the 
tray to be unavailable for auto switching.

•

If the tray elevator is in the raised position and the tray is not in 
use or selected as a backup tray, pressing this button causes 
the elevator to lower with no effect on printing operations.

This button functions when the Please Wait indicator is off.