Xerox 300x Guía Del Usuario
3
Calibrating the Printer
3-12
PhaserMatch
Note
If you used the
Load Calibration command in the File menu to
load a previously saved or imported calibration, those settings are
used by the application to print the test print.
used by the application to print the test print.
■
Macintosh: The PhaserMatch application checks the printer’s
current calibration settings. The printer’s settings are used for
printing the Gray Linearity test print, and are used as the starting
point for making modifications to the calibration settings.
current calibration settings. The printer’s settings are used for
printing the Gray Linearity test print, and are used as the starting
point for making modifications to the calibration settings.
■
Windows: The PhaserMatch application uses the last calibration
settings you made for that printer. Your last calibration settings are
used for making the Gray Linearity test print, and are used as the
starting point for making modifications to the calibration settings.
However, your last calibration settings may not be the same
settings currently in the printer if someone else has made changes.
If your last settings in the PhaserMatch application don’t match
the printer’s current calibration settings, then printing the Gray
Linearity test print changes the printer’s settings to match the
application’s settings.
settings you made for that printer. Your last calibration settings are
used for making the Gray Linearity test print, and are used as the
starting point for making modifications to the calibration settings.
However, your last calibration settings may not be the same
settings currently in the printer if someone else has made changes.
If your last settings in the PhaserMatch application don’t match
the printer’s current calibration settings, then printing the Gray
Linearity test print changes the printer’s settings to match the
application’s settings.