Xerox 6125 Guía Del Usuario

Toner smears when 
rubbed

The paper is damp.

Replace the paper. See 

on page 4-5.

The paper is outside the recommended specification range.

Replace the paper with a recommend size and type, and confirm that your 
print driver settings are correct. See 

on page 4-5.

The toner cartridges are not Xerox toner cartridges.

Verify that the toner cartridges (C/M/Y/K) meet specifications, and replace 
if necessary.

The fuser is old or damaged.

Replace the fuser.

Blank pages

Two or more sheets may be feeding at once.

Remove the paper stack from the tray, fan it, and reinsert it.

The toner cartridges are not Xerox toner cartridges.

Verify that the toner cartridges (C/M/Y/K) meet specifications, and replace 
if necessary.

The transfer unit is old or damaged.

Replace the transfer unit.

The high-voltage supply is defective.

See the Xerox Support website, 

, for 

assistance.

Hair-like marks appear 
in or around black 
half-tone printing 
Shadows appear 
around areas of dense 
black printing

The paper was left unwrapped for a long time (especially in a dry 
environment).

Replace the paper. See 

on page 4-5.

The paper is outside the recommended specification range.

Replace the paper with a recommended size and type, and confirm that 
your print driver settings are correct. See 

on page 4-5.

The transfer unit is old or damaged.

Replace the transfer unit.

Color around the edge 
of printing is incorrect

The color registration is incorrect.

Adjust the color registration. See 

Colored dots are 
printed at regular 
intervals (about 28 mm)

The imaging unit is dirty.

Clean the imaging unit.