Xerox 750P Guía Del Usuario

Error 52

■

Remove the Duplex Unit (if installed).

■

Check for paper under the Upper Tray.

■

Turn power off, then on.

Error 53

■

Open left door and remove any jammed media.

■

Tun the printer off, then on.

Error 60

■

Remove the media from the Multi-Purpose Tray. Turn the printer off, then on.

■

Reinstall the media. Make sure you do not overfill the tray.

Error 61

■

Remove and re-install each Toner Cartridge. Turn the printer off, then on.

■

Replace each Toner Cartridge. Turn the printer off, then on.

Error 62

■

Check for jammed paper throughout the paper path (especially in the paper 

feeder and Fuser). 

■

Remove and re-install the Fuser. Turn the printer off, then on.

■

Slide out and re-insert the paper feeder. Turn the printer off, then on.

■

Replace the Fuser. Turn the printer off, then on.

Error 63

■

Remove and re-install the Imaging Unit. Turn the printer off, then on.

■

Replace the Imaging Unit. Turn the printer off, then on.

Error 70

, 

71

, 

and 

72

■

Turn the printer off, then on.

Error 73

■

Remove and re-install the Imaging Unit. Turn the printer off, then on.

■

Replace the Imaging Unit. Turn the printer off, then on.

Error 74

■

Remove and re-install the Fuser. Turn the printer off, then on.

■

Replace the Fuser. Turn the printer off, then on.

Error 80

, 

81

, 

82

, 

83

, and 

84

■

Make sure that all four toner cartridges are installed in the printer.

■

Turn the printer off, then on.

Error 01p 

through

Error 47p

■

Make sure that installed memory DIMM(s) are compatible with printer’s image 

processor board and that they are installed in the proper slot(s).