Xerox 6180MFP Guía Del Usuario

 

If you notice unusual noises or odors:

Turn off the printer immediately.

Disconnect the power cord from the electrical outlet. 

Call an authorized service representative to correct the problem.

The power cord is attached to the printer as a plug-in device at the back of the printer. If it is 
necessary to disconnect all electrical power from the printer, disconnect the power cord from 
the electrical outlet.

 

Do not remove the covers or guards that are fastened with screws unless you are 

installing optional equipment and are specifically instructed to do so. Power should be OFF 
when performing these installations. Except for user-installable options, there are no parts that 
you can maintain or service behind these covers.

 

Leave the printer on for optimum performance; it does not pose a safety hazard. If 

however the printer will not be used over an extended period of time, it should be turned off 
and unplugged.

 

The following are hazards to your safety:

■

The power cord is damaged or frayed.

■

Liquid is spilled into the printer.

■

The printer is exposed to water.

If any of these conditions occur, do the following:

Turn off the printer immediately.

Disconnect the power cord from the electrical outlet.

Call an authorized service representative.

To reduce the risk of fire, use only No. 26 American Wire Gauge or larger 

telecommunication line cord.

With specific regard to lasers, this printer complies with laser product performance standards 
set by governmental, national, and international agencies and is certified as a Class 1 Laser 
Product. The printer does not emit hazardous light because the beam is totally enclosed during 
all modes of customer operation and maintenance.