Xerox 490cx Guía Del Usuario
235
SEARCH
SAFETY AND LEGAL REQUIREMENTS FOR XEROX EUROPE
Do not use this product near water, wet locations, or outdoors.
Do not place this product on an unstable cart, stand, or table. The product
may fall, causing personal injury or serious damage to the product.
may fall, causing personal injury or serious damage to the product.
Warning: This product must be earthed.
This product is equipped with a 3-wire, grounding-type plug (i.e., a plug
having a third grounding pin). This plug will only fit into a grounding-type
power outlet. This is a safety feature. To avoid the risk of electric shock,
contact your electrician to replace the receptacle if you are unable to insert
the plug into the outlet. Never use a grounding adapter plug to connect the
product to a power source receptacle that lacks a ground connection
terminal.
having a third grounding pin). This plug will only fit into a grounding-type
power outlet. This is a safety feature. To avoid the risk of electric shock,
contact your electrician to replace the receptacle if you are unable to insert
the plug into the outlet. Never use a grounding adapter plug to connect the
product to a power source receptacle that lacks a ground connection
terminal.
This product is equipped with an energy saving device to conserve power
when the machine is not in use. The machine may be left on continuously.
when the machine is not in use. The machine may be left on continuously.
This product should be operated from the type of power source indicated on
the marking label. If you are not sure of the type of power available, consult
your local power company.
the marking label. If you are not sure of the type of power available, consult
your local power company.
Do not allow anything to rest on the power cord. Do not locate the product
where persons will step on the cord.
where persons will step on the cord.
Slots and openings in the cabinet and in the back and bottom of the product
are provided for ventilation. To ensure reliable operation of the product and
to protect it from overheating, these openings must not be blocked or
covered. The product should never be placed near or over a radiator or heat
register. This product should not be placed in a built-in installation unless
proper ventilation is provided.
are provided for ventilation. To ensure reliable operation of the product and
to protect it from overheating, these openings must not be blocked or
covered. The product should never be placed near or over a radiator or heat
register. This product should not be placed in a built-in installation unless
proper ventilation is provided.