Gestetner 1045 Guía Del Usuario
Setting up a Client Computer
39
3
Setting up a Client Computer
This section describes the procedures for setting up a client in a network that
uses Windows 2000, Windows NT Server or Windows NT Workstation as a
print server.
To print from Windows NT 4.0, you must first install the printer driver and
change the printer port to the print server.
uses Windows 2000, Windows NT Server or Windows NT Workstation as a
print server.
To print from Windows NT 4.0, you must first install the printer driver and
change the printer port to the print server.
Note
❒ This section assumes that the client has already been configured to communi-
cate with a Windows 2000 or Windows NT print server. Do not begin the fol-
lowing procedure until the client has been set up and configured correctly.
lowing procedure until the client has been set up and configured correctly.
Use the [Printers] window to set up the printer.
A
Click [Start], point to [Settings], and then click [Printers].
B
Double-click the [Add Printer] icon.
This launches the Add Printer Wizard.
This launches the Add Printer Wizard.
C
Click [Network printer server] and click [Next >].
D
In the [Shared Printers] box, double-click the name of the computer used as a
print server.
The printers attached to the network are displayed.
print server.
The printers attached to the network are displayed.
E
Click the printer you want to use and click [OK].
Note
❒ If the printer driver is not installed in the print server, a message appears.
If a driver has been installed on the client, click [OK] and follow the instruc-
tions on the screen.
tions on the screen.
❒ There is a Windows NT printer driver on the CD-ROM labeled “Printer
Drivers and Utilities”.
Windows NT 4.0
Windows 2000 or
Windows NT Print Server
Windows NT Print Server