Gestetner c7528 Guía De Instalación
Read This First
5
• Only connected the machine to the power source described on the in-
side front cover of this manual.
• Avoid multi-wiring.
• Do not damage, break or make any modifications to the power cord.
Do not place heavy objects on it, pull it hard or bend it more than nec-
essary. These actions could cause an electric shock or fire.
essary. These actions could cause an electric shock or fire.
• Do not plug or unplug the power cord with your hands wet. Otherwise,
an electric shock might occur.
• Make sure the wall outlet is near the machine and freely accessible so
that in event of an emergency it can be unplugged easily.
• Do not remove any covers or screws other than those specified in this
manual. Some parts of the machine are at a high voltage and could
give you an electric shock. Also, if the machine has laser systems, di-
rect (or indirect) reflected eye contact with the laser beam may cause
serious eye damage. When the machine needs to be checked, adjust-
ed, or repaired, contact your service representative.
give you an electric shock. Also, if the machine has laser systems, di-
rect (or indirect) reflected eye contact with the laser beam may cause
serious eye damage. When the machine needs to be checked, adjust-
ed, or repaired, contact your service representative.
• Do not take apart or attempt any modifications to this machine. There
is a risk of fire, electric shock, explosion or loss of sight. If the ma-
chine has laser system, there is a risk of serious eye damage.
chine has laser system, there is a risk of serious eye damage.
• If the machine looks damaged or breaks down, smoke is coming out,
there is a strange smell or anything looks unusual, immediately turn
off the operation and main power switches then unplug the power
cord from the wall. Do not continue using the machine in this condi-
tion. Contact your service representative.
off the operation and main power switches then unplug the power
cord from the wall. Do not continue using the machine in this condi-
tion. Contact your service representative.
• If metal, liquid or foreign matter falls into the machine, turn off the op-
eration and main power switches, and unplug the main power cord.
Contact your service representative. Do not keep using the machine
with a fault or defect.
Contact your service representative. Do not keep using the machine
with a fault or defect.
• Keep the machine away from flammable liquids, gases, and aerosols.
A fire or an electric shock might occur.
• Do not put any metal objects or containers holding water (e.g. vases,
flowerpots, glasses) on the machine. If the contents fall inside the ma-
chine, a fire or electric shock could occur.
chine, a fire or electric shock could occur.
• Do not incinerate spilled toner or used toner. Toner dust is flammable
and might ignite when exposed to an open flame.
• If you dispose of the used toner cartridges yourself, dispose of them
according to local regulations.
• Do not store toner, used toner, or toner containers in a place with an
open flame. The toner might ignite and cause burns or a fire.