Gestetner c7528 Guía De Operación
Monitoring and Configuring the Printer
231
❖ Rendezvous computer name setting
You can specify the rendezvous computer name.
msh> rendezvous cname “computer name”
• The computer name can be entered using up to 63 alphanumeric charac-
ters.
❖ rendezvous Installation location information setting
You can enter information about the location where the printer is installed.
msh> rendezvous location “location”
• Information about location can be entered using up to 32 alphanumeric
characters.
❖ Setting order of priority for each protocol
• diprint
msh> rendezvous diprint [0-99]
• lpr
msh> rendezvous lpr [0-99]
• ipp
msh> rendezvous ipp [0-99]
You can specify the order of priority for “diprint”, “lpr”, and “ipp”. Smaller num-
bers indicate higher priority.
bers indicate higher priority.
❖ IP TTL setting
msh> rendezvous ipttl {1-255}
You can specify the IP TTL (the number of routers a packet can pass
through).
You can specify the IP TTL (the number of routers a packet can pass
through).
❒ The default is 255.
❖ Resetting the computer name and location information
You can reset the computer name and location information.
msh> rendezvous clear {cname | location}
• cname
Reset the computer name. The default computer name will be displayed
when the computer is restarted.
when the computer is restarted.
• location
Reset the location information. The previous location information will be
deleted.
deleted.
❖ Interface configuration
msh> rendezvous linklocal “interface_name”
• If many types of interface are installed, configure the interface that commu-
nicates with linklocal address.