Gestetner 2045 Manual De Usuario
Sub Transmission Mode
55
4
Sub Transmission Mode
Book Fax
Use to send book originals from the
exposure glass. Pages are scanned in
the order shown below.
exposure glass. Pages are scanned in
the order shown below.
Limitation
❒ Place the original on the exposure
glass. You cannot use the optional
Auto Document Feeder (ADF).
Auto Document Feeder (ADF).
❒ Depending on paper sizes availa-
ble in the destination machine, the
message may be reduced when
printed at the other end.
message may be reduced when
printed at the other end.
Note
❒ You can have bound originals
scanned as left or right page first.
You can set which page (left or
right) the machine scans first as de-
fault with the User Parameters. See
p.147 “Changing the User Parame-
ters” (switch 06, bit 6).
You can set which page (left or
right) the machine scans first as de-
fault with the User Parameters. See
p.147 “Changing the User Parame-
ters” (switch 06, bit 6).
AAAA
Place the original on the exposure
glass, and then select the scan set-
tings you require.
glass, and then select the scan set-
tings you require.
BBBB
Press [Sub TX Mode].
CCCC
Select [Book Fax].
DDDD
Select the size of the original.
Note
❒ To cancel this mode, press [Can-
cel]
. The display returns to that
of step
.
❒ If you select A3, the original will
be sent using Image Rotation
Transmission. See p.73 “Trans-
mission with Image Rotation”.
Transmission. See p.73 “Trans-
mission with Image Rotation”.
EEEE
Select [From first Page] or [From sec-
ond Page]
ond Page]
, and then press [OK].
The selected original size is shown
above the highlighted [Book Fax].
above the highlighted [Book Fax].