Gestetner 2235 Manuales De Servicio
Copying
32
2
Setting Originals in the
Document Feeder
Document Feeder
Note
❒ The last page should be on the bot-
tom.
❒ Do not stack originals beyond the
limit mark on the side fence of the
document feeder.
document feeder.
❒ The original might become dirty if
it is written with a pencil or similar
tools.
tools.
Reference
Regarding originals that the docu-
ment feeder can handle.
ment feeder can handle.
⇒ P.19
“Originals”.
A
Set the aligned originals face up
into the document feeder.
into the document feeder.
1: Limit mark
2: Document guide
2: Document guide
Note
❒ Straighten curls in the originals
before setting them in the docu-
ment feeder.
ment feeder.
❒ To avoid a multi-sheet feed,
shuffle the originals before set-
ting them in the document feed-
er.
ting them in the document feed-
er.
Original Orientation
You can set the original orientation
separately in the following ways.
This function is useful for copying
torn originals or large originals.
separately in the following ways.
This function is useful for copying
torn originals or large originals.
❖
❖
❖
❖ Standard Orientation
Select this function when the origi-
nal direction is the same as the
copy paper direction.
nal direction is the same as the
copy paper direction.
❖
❖
❖
❖ 90°°°° Turn
This function rotates the copy im-
age by 90
age by 90
°.
Use this function when you want
to copy onto A3, B4, 11"
to copy onto A3, B4, 11"
× 17" pa-
per.
A
Press the [Special Original] key.
B
Select the original orientation.
Standard Orientation
A Make sure that the
key is
selected.
AdonisC2_ENcopy122F_FM.book Page 32 Thursday, February 15, 2001 3:23 PM