Gestetner 5490 Guía De Operación

Operation

86

Command sheets are fed first so that the machine can recognize the areas of the
original which are to be edited as designated areas.

The command sheet is a sheet of paper for designating areas to be edited. Com-
mand sheets must be made on white or translucent paper, and should be the
same size as the original.
Do not designate areas within 5 mm, 0.2" from the top.

❒ Poor quality paper (such as newsprint, recycled paper, etc.) should not be

used for command sheets because any dark spots or streaks will be read as
designated areas.

❒ Do not use blotting paper or other absorbent paper for command sheets be-

cause ink might leak through the paper and get the exposure glass dirty.

There are two ways of designating areas: the diagonal line method and the
closed area method.

-

-

-

-Features

• You can combine up to 4 command sheets when making a master.

• You cannot use both the closed and diagonal line method on the same com-

mand sheet.