Gestetner 5455 Manual De Usuario

167

If a malfunction or a misfeed occurs, the following messages will appear on the
panel display.

Check the original direc-
tion.

The paper is not placed in the same direction as the original.
Place the original in the same direction as the paper.

If you press the 

{{{{Print}}}} key, the selected paper will be used for print-

ing.

Size of original and pa-
per is not the same.

Set a paper size that matches the reproduction ratio you have select-
ed and your original.

The reproduction ratio selected by Auto Magnification mode is too 
big or too small.

❒ You can make prints if you press the {{{{Print}}}} key.

Set original.

Make prints after confirming whether there is an original on the ex-
posure glass.

Make sure that you have changed the original on the exposure glass 
before pressing the 

{{{{Start}}}} key.

Max. quantity: ****

The number of prints exceeds the maximum print quantity.

You can change the maximum number of prints that can be made in 
one operation with the user tools. See “Max. Quantity” on p.142 “2. 
Set Operat'n Mode”.

Min. quantity: ****

The number of prints does not exceed the minimum print quantity.

You can change the minimum number of prints that can be made in 
one operation with the user tools. See “Min. Quantity” on p.142 “2. 
Set Operat'n Mode”.

Drum unit is not set.  Set 
Drum unit.

Slide in the drum until it clicks.

Make sure that the drum is completely set in position.

Communication error

Turn the main switch off 
then on

Turn the main switch off and on.

If the message appears again, contact your service representative.

Overloaded for the de-
livery tray
Please remove the paper

Remove the paper from the delivery tray.

See “Delivery Capacity” on p.142 “2. Set Operat'n Mode”.