Gestetner 6002 Guía Del Usuario
79
3. Program
Programs
You can store frequently used copy
job settings in memory and recall
them for future use.
job settings in memory and recall
them for future use.
Note
❒ You can store up to 10 programs.
❒ You can select standard mode or
❒ You can select standard mode or
program No. 10 as the mode to be
set when modes are cleared or re-
set, or immediately after the opera-
tion switch is turned on.
set when modes are cleared or re-
set, or immediately after the opera-
tion switch is turned on.
❒ Paper settings are stored based on
size. So, if paper of the same size is
set for more than one tray, the pa-
per tray prioritized with User
Tools (System Settings) will be se-
lected first.
set for more than one tray, the pa-
per tray prioritized with User
Tools (System Settings) will be se-
lected first.
⇒“Paper Settings”
General Settings Guide
❒ Programs are not cleared by turn-
ing the power off or by pressing
the
the
{{{{Clear Modes}}}} key. They are
canceled only when you delete or
overwrite them with another pro-
gram.
overwrite them with another pro-
gram.
Storing a Program
AAAA
Edit the copy settings so that all
functions you want to store in this
program are selected.
functions you want to store in this
program are selected.
BBBB
Press the
{{{{Program}}}} key.
CCCC
Press the [Register] key.
DDDD
Press the program number you
want to store.
want to store.
Note
❒ Program numbers with m
against them already have set-
tings in them.
tings in them.
Reference
⇒ p.80 “Changing a stored pro-
gram”
⇒ p.80 “Changing a stored pro-
gram”
ZGVS050E