Gestetner 9980 Manual De Usuario

Handy Functions

25

Energy Saver mode is a power saving feature.
When not used for 5 minutes, the machine reduces its electricity consumption to
the bare minimum.
• There are two kinds of Energy Saver mode, and you can choose which takes

priority: 
• Fax StandbyUse if you frequently receive incoming faxes
• Low Power StandbyUse to minimize power consumption

*1

It is possible to combine High Temperature Standby mode with either Low Power

Standby mode or Fax Standby mode. If you turn High Temperature Standby on,

15 minutes after entering Energy Saver mode the heater power is not turned off.

*2

Values for when no options are installed.

*3

2.4W when the optional G4 unit is installed, 2.4W when the optional G3 unit is in-

stalled, 6.0W when the optional NIC FAX Kit is installed, 13W or 16W (with NIC

FAX Kit) when the optional printer interface is installed.

• Documents already stored in memory will still be sent, and fax reception is

still possible. When a fax is received, the machine prints it out then returns to
Energy Saver mode.

• In Energy Saver mode, the operation panel display goes blank. However, if a

message is received using Substitute Reception or Confidential Reception, an
indicator will light to inform you. If the Substitute Reception indicator or
Confidential Reception indicator is lit or flashing, exit Energy Saver mode
and take appropriate action.

❒ The machine switches to Low Power Standby mode as long as the following

apply:
• Low Power Standby mode is turned on
• The machine is not being used
• The heater temperature is low

Low Power 
Standby

Display is 
blank, power to 
heater is off

Within about 
55 seconds

You can switch 
this on or off

Fax Standby

Display is 
blank, power to 
heater is low

Within about 
45 seconds

You can switch 
this on or off

45W