Gestetner 9980 Manual De Usuario
Immediate Transmission
55
2
Immediate Transmission
With Immediate Transmission, when
you press the {
you press the {
Start
} key, the fax
number is dialed straight away (i.e.
immediately). The message is
scanned and transmitted page by
page without being stored in memo-
ry. This contrasts with Memory
Transmission which scans in all pages
into memory before dialing the desti-
nation.
Immediate Transmission is useful if
you want immediate confirmation
that the message is being sent to the
correct destination (just check the oth-
er terminal's RTI or CSI on the opera-
tion panel during transmission).
immediately). The message is
scanned and transmitted page by
page without being stored in memo-
ry. This contrasts with Memory
Transmission which scans in all pages
into memory before dialing the desti-
nation.
Immediate Transmission is useful if
you want immediate confirmation
that the message is being sent to the
correct destination (just check the oth-
er terminal's RTI or CSI on the opera-
tion panel during transmission).
Note
❒ You cannot send the same message
to multiple destinations (Broad-
casting). Use Memory Transmis-
sion for this purpose.
casting). Use Memory Transmis-
sion for this purpose.
❒ If the Back Up Transmission fea-
ture is turned on, you cannot send
using Immediate Transmission.
using Immediate Transmission.
❒ By default, the transmission mode
selected when the machine is
turned on or when modes are
cleared (transmission mode home
setting) is Memory Transmission.
You can change this with the User
Parameters.
turned on or when modes are
cleared (transmission mode home
setting) is Memory Transmission.
You can change this with the User
Parameters.
❖
Auto Redial
If a connection to the other party
could not be made (e.g. because
the line is busy), the machine redi-
als up to twice at 1 minute interval.
could not be made (e.g. because
the line is busy), the machine redi-
als up to twice at 1 minute interval.
❖
ECM (Error Correction Mode)
This feature automatically sends
data that wasn't transmitted suc-
cessfully again using a technique
data that wasn't transmitted suc-
cessfully again using a technique
called ECM, an internationally rec-
ognized protocol (requires that the
destination machine has the same
feature).
ognized protocol (requires that the
destination machine has the same
feature).
A
Make sure that the Immediate
Transmission indicator is lit.
Transmission indicator is lit.
If it is not lit, press the {
Transmis-
sion Mode
} key.
B
Set your document.
Note
❒ You can set the document any
time up until you press the
{
Start
} key.
Reference
How to set a document, see P.35
“How to Set a Document”.
“How to Set a Document”.
C
Select any scan settings you re-
quire.
quire.
Reference
D
Dial the destination number.
Note
❒ If you make a mistake, press the
{
Clear
} key or {
Stop
} key and
try again. The {
Clear
} key de-
letes one character at a time, and
the {
the {
Stop
} key deletes the whole
line.