Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Gestetner
  4. 9980
  5. Manual De Usuario

Gestetner 9980 Manual De Usuario

Descargar
Página de 107
Scan Settings
63
2
Image Density
❖
Normal
This is the standard image density.
❖
Dark
Use if documents contain faint
characters or handwriting.
❖
Light
Use if the image is dark and would
otherwise be reproduced as black
at the other end.
Note
❒ When the machine is turned on or
modes are cleared, the Image Den-
sity setting is set to Normal. You
can change this with the User Pa-
rameters.
❒ By default, the machine returns to
the Image Density home setting af-
ter every transmission. You can
change this with the User Parame-
ters.
A
Press the {
Image Density
} key until
the appropriate indicator lights.
Halftone
If your document contains photo-
graphs, illustrations or diagrams with
complex shading patterns or grays,
select  Halftone to optimize image
clarity. 
Note
❒ If you select Halftone, the trans-
mission will take longer than when
off is selected.
❒ If the optional JBIG unit is in-
stalled, transmission time is short-
ened even it Halftone is selected.
❒ When the machine is turned on or
modes are cleared, the Halftone is
set to off. You can change this with
the User Parameters.
❒ By default, the machine returns to
the Halftone home setting after ev-
ery transmission. You can change
this with the User Parameters.
A
Press the {
Halftone
} key repeated-
ly until the indicator matching
the type you require is lit.
When both indicators are not lit,
the Halftone settings is off. 
Mixing Scan Settings in a 
Multiple Page Document
When sending a document consisting
of several pages, you can select differ-
ent Image Density, Resolution and for
each page.
Set your document, select the scan
settings for the first page, dial and
press the {
Start
} key as you would
normally. Then follow one of the fol-
lowing two procedures.
A
Check which pages you wish to
make different scan settings for.