Gestetner 9980 Manual De Usuario
Dialing
69
2
Tone
This feature allows a machine con-
nected to a pulse dialing line to send
tonal signals (for example if you want
to use a special service on a tone dial-
ing line). When you press the User
Function key assigned with the Tone
feature, the machine dials the number
using tonal signals.
nected to a pulse dialing line to send
tonal signals (for example if you want
to use a special service on a tone dial-
ing line). When you press the User
Function key assigned with the Tone
feature, the machine dials the number
using tonal signals.
Preparation
You need to assign the Tone fea-
ture to a User Function key before-
hand.
ture to a User Function key before-
hand.
Limitation
❒ You cannot place a tone before the
first digit of a fax number.
❒ Some services may not be available
when using the Tone feature.
Note
❒ A tone is shown as a “ • ” on the
display.
❖
Sending tone signals by ISDN (ISDN
option Required)
option Required)
You can still send tone signals to a
G3 user even if the machine is only
connected to an ISDN line.
G3 user even if the machine is only
connected to an ISDN line.
Note
❒ This feature can only be used for
Memory or Immediate Transmis-
sion. You cannot dial through
ISDN using Manual Dial. When
only connected to ISDN, you can
use On Hook Dial.
sion. You cannot dial through
ISDN using Manual Dial. When
only connected to ISDN, you can
use On Hook Dial.
SUB Code Transmission
Normally you can only use Confiden-
tial Transmission or Transfer Request
to send to fax machines of the same
make that have the Confidential Re-
ception or the Transfer Request fea-
tial Transmission or Transfer Request
to send to fax machines of the same
make that have the Confidential Re-
ception or the Transfer Request fea-
ture. However, if the other machine
supports a similar feature called
SUB/SID, you can send fax messages
to the other party using this method
instead.
You can also use SUB code Transmis-
sion to send messages to Personal
Boxes and Transfer Boxes registered
in other fax machines.
supports a similar feature called
SUB/SID, you can send fax messages
to the other party using this method
instead.
You can also use SUB code Transmis-
sion to send messages to Personal
Boxes and Transfer Boxes registered
in other fax machines.
Preparation
You need to assign the Dial Option
feature to a User Function key be-
forehand.
You can only use this feature in a
G3 communications (not with G4).
You cannot use Chain Dial with
this feature.
feature to a User Function key be-
forehand.
You can only use this feature in a
G3 communications (not with G4).
You cannot use Chain Dial with
this feature.
Note
❒ The ID can be up to 20 digits long
and consist of digits, spaces, * and
#.
#.
❒ Make sure the ID matches the
specification of the fax you are
sending to.
sending to.
❒ You can store IDs in Quick Dials,
Speed Dials, Groups and Pro-
grams.
grams.
❒ Messages you send using this fea-
ture are marked “SUB” on the re-
ports below:
ports below:
• File Reserve Report (Memory
Transmission)
• File Reserve Report (Polling Re-
ception)
• Communication Result Report
• Communication Failure Report
• Transmission Result Report
• Communication Failure Report
• Transmission Result Report
A
Set your document and make any
changes to the scan settings if nec-
essary.
changes to the scan settings if nec-
essary.