Gestetner cs555 Guía De Referencia
Placing Originals
14
1
Placing Originals on the
Exposure Glass
Exposure Glass
Reference
For related default settings, see
p.155 “Eject Copy Face Up / Down
in Glass Mode”.
For related default settings, see
p.155 “Eject Copy Face Up / Down
in Glass Mode”.
AAAA
Lift the ADF.
Important
❒ Do not lift the ADF forcefully.
O t h e r w i s e , t h e A D F c o v e r
might open or be damaged.
might open or be damaged.
Note
❒ Be sure to lift the ADF more
than 30
°. Otherwise, the size of
the original might not be detect-
ed correctly.
ed correctly.
BBBB
Place the original face down on
the exposure glass. It should be
aligned with the left scale.
the exposure glass. It should be
aligned with the left scale.
1.
Positioning mark
2.
Left scale
Note
❒ Start with the first page to be
copied.
CCCC
Lower the ADF.
Placing Originals in the Auto
Document Feeder
Document Feeder
Settings should be made accordingly
in the following situations:
in the following situations:
❖
❖
❖
❖ When placing originals consisting of
more than 100 pages:
p.15 “Batch”
❖
❖
❖
❖ When placing originals one by one:
p.16 “SADF”
❖
❖
❖
❖ When placing originals of the same
width but different sizes:
p.16 “Placing originals of mixed
sizes”
sizes”
❖
❖
❖
❖ When placing custom size originals:
p.17 “Placing custom size origi-
nals”
nals”
Note
❒ Do not stack originals above the
limit mark on the side guide of the
ADF.
ADF.
❒ The last page should be on the bottom.
❒ When you copy two-sided origi-
❒ When you copy two-sided origi-
nals, both front and back sides of
each original are scanned at once.
each original are scanned at once.
❒ Do not place objects on the sensors
or cover them with your hands, or
the original size may not be detect-
ed properly.
the original size may not be detect-
ed properly.
1.
Sensors
ZGMH012E
ADB028S