Gestetner cs555 Guía De Referencia

Copying

Important

❒ When Basic Authentication, Win-

dows Authentication, or LDAP
Authentication is set, always log
off when you have finished using
the machine to prevent unautho-
rized users from using the ma-
chine.

-How to operate

❖

❖ To stop the machine during a multi-

copy run

Press the

{{{{Clear/Stop}}}} key.

❖

❖ To return the machine to the initial

condition after copying

Press the

{{{{Clear Modes}}}} key.

❖

❖ When clearing entered values

Press the

{{{{Clear/Stop}}}} key or [Clear]

on the display.

❖

❖ To check the settings

Press the

{{{{Check Modes}}}} key.

Interrupt Copy

Use this function to interrupt a long
copy job to make urgently needed
copies.

AAAA

Press the

{{{{Interrupt}}}} key.

The Interrupt indicator lights.

When scanning is interrupted

A Remove the originals that were

being copied, and then place
the originals you want to copy.

B Press the {{{{Start}}}} key.

Copying starts.

C When copying is complete, re-

move the originals and copies.

D Press the {{{{Interrupt}}}} key again.

The Interrupt indicator turns
off.

E When the display prompts you

to do so, place the former set of
originals again.

F Press the {{{{Start}}}} key.

Note

❒ The previous copy job's set-

tings are restored and the
machine continues copying
from where it left off.

When the machine continues
copying

A Place the originals you want to

copy.

B Press the {{{{Start}}}} key.

The machine stops the previous
job and starts copying the new
originals.

C When copying is complete, re-

move originals and copies.

D Press the {{{{Interrupt}}}} key again.

The Interrupt indicator goes
out.
The previous copy job's settings
are restored and the machine
continues copying from where
it left off.

AFU170S