Gestetner cs555 Guía De Referencia
Copier Functions
71
2
Center/border erase
AAAA
Press [Edit / Color Creation].
BBBB
Press [Erase / Margin Adj.].
CCCC
Press [Erase Center / Border].
DDDD
Press [Center / Border].
EEEE
Set the center and border to be
erased.
erased.
Selecting [Same Width]
A Press [Same Width].
B Press [Center], and then set the
erase center width using [
n
n
n
n]
and [
o
o
o
o].
C Press [Border], and then set the
erase border width using [
n
n
n
n]
and [
o
o
o
o].
Selecting [Diff. Width]
A Press [Diff. Width].
B Press the key for the part you
want to change, and then set
the erase margin width using
[
the erase margin width using
[
n
n
n
n] and [o
o
o
o].
FFFF
Press [2 Sided Setting], and then
press [Back Side].
press [Back Side].
Note
❒ If you do not need to erase the
border or center on the back of
the original, proceed to step
the original, proceed to step
H
.
GGGG
Set the erase border or center
width for the back of the original.
width for the back of the original.
Note
❒ Erasing the center or border of
the back of the original is valid
only when you are copying 2-
sided originals.
only when you are copying 2-
sided originals.
HHHH
Press [OK] three times.
IIII
Place the originals, and then press
the
the
{{{{Start}}}} key.
Inside Erase
AAAA
Specify the point where the ma-
chine starts scanning (X1, Y1) and
where it stops scanning (X2, Y2).
chine starts scanning (X1, Y1) and
where it stops scanning (X2, Y2).
Note
❒ You can input lengths of 0 – 432
mm, 0 – 17".