Gestetner dsc332 Guía De Operación
Printing with NetWare
71
5
B To create a new print server,
press the
{{{{INSERT}}}} key, and
then enter a print server name.
Note
❒ If you are using a currently
defined print server, select
o n e o f t h e p r in t s e rv e rs
shown in the [Print Server] list.
o n e o f t h e p r in t s e rv e rs
shown in the [Print Server] list.
Important
❒ Use the same name as that
specified in NIB Setup Tool.
(Step
(Step
C On the [Print Server Information]
menu, click [Print Server Configu-
ration]
ration]
.
D On the [Print Server Configura-
tion]
menu, click [Printer Configu-
ration]
.
E Select the printer indicated as
"Not Installed".
Important
❒ Use the same number as that
D).
F If you want to change the
printer nam e, enter a new
name.
name.
Note
❒ The name "Printer x" is as-
signed to the printer. "x"
stands for the number of the
selected printer.
stands for the number of the
selected printer.
G Click [Remote Parallel, LPT1] as
the printer type.
IRQ, Buffer size, Starting form,
and Queue service mode are au-
tomatically configured.
IRQ, Buffer size, Starting form,
and Queue service mode are au-
tomatically configured.
H Press the {{{{ESC}}}} key, and then
click [Yes] when the confirma-
tion message appears.
tion message appears.
I Press the {{{{ESC}}}} key to return to
the [Print Server Configuration]
menu.
menu.
LLLL
Assign print queues to the created
printer as follows:
A On the [Print Server Configura-
printer as follows:
A On the [Print Server Configura-
tion]
menu, click [Queues Serv-
iced By Printer]
.
B Select the printer created in
step
.
C Press the {{{{INSERT}}}} key to select
a queue serviced by the print-
er.
er.
Note
❒ You can select more than one
queue at a time.
D Follow the instructions on
screen to make other necessary
settings.
When you have finished the
above procedure, make sure the
queues are assigned.
settings.
When you have finished the
above procedure, make sure the
queues are assigned.
MMMM
Press the
{{{{ESC}}}} key until the "Ex-
it?" appears, and then click [Yes]
to quit PCONSOLE.
to quit PCONSOLE.
NNNN
Start the print server by entering
the following from the NetWare
server's keyboard.
If it is running, restart after quit-
ting.
the following from the NetWare
server's keyboard.
If it is running, restart after quit-
ting.
❖
❖
❖
❖ To quit
CAREE: unload pserver
❖
❖
❖
❖ To start
CAREE: load pserver
print_server_name
print_server_name
Note
❒ If the printer works as config-
ured, "Waiting for job" appears.
❒ NetWare 3.x ends here.