Gestetner dsc332 Guía De Operación
1
Earth Leakage Breaker
To prevent electric shock this ma-
chine has an earth leakage breaker.
The earth leakage breaker is normally
in the on position.
Once a month, check that it functions
properly by following the procedure
below.
chine has an earth leakage breaker.
The earth leakage breaker is normally
in the on position.
Once a month, check that it functions
properly by following the procedure
below.
Important
❒ If the earth leakage breaker is not
functioning normally, contact your
sales or service representative.
sales or service representative.
AAAA
Make sure the exposure glass cov-
er or the Automatic Document
Feeder (ADF) (optional) is closed.
er or the Automatic Document
Feeder (ADF) (optional) is closed.
BBBB
Press the operation switch at the
top right hand corner of the con-
trol panel and see that the On in-
dicator turns off.
top right hand corner of the con-
trol panel and see that the On in-
dicator turns off.
Note
❒ In the following cases, the indi-
cator will not turn off but will
instead blink when you press
the operation switch.
• When the exposure glass
instead blink when you press
the operation switch.
• When the exposure glass
cover or ADF is open
• During communication with
external equipment
• When the hard disk is active
CCCC
Make sure that the On indicator is
not lit, and then turn off the main
power switch of the machine.
not lit, and then turn off the main
power switch of the machine.
Important
❒ Do not turn off the main power
switch when the On indicator is
lit or blinking. Otherwise, it
may result in damage to the
hard disk or memory.
lit or blinking. Otherwise, it
may result in damage to the
hard disk or memory.
DDDD
If the finisher is installed, detach
it from the machine.
it from the machine.
Note
❒ The above illustration shows
the 2 tray finisher. If you are us-
ing the Booklet finisher, detach
it in the same way.
ing the Booklet finisher, detach
it in the same way.
EEEE
Raise the metal bar below the du-
plex reversal unit.
plex reversal unit.
ABE001S
ABM002S
JupC1_ENAE_L-Breaker_Chapter-1 Page 1 Wednesday, September 10, 2003 10:26 AM