Gestetner dsc332 Guía De Operación
Troubleshooting
80
5
Solving Problems
This table lists some common problems and their solutions.
Problem
Causes and solutions
Reference
Image background appears
dirty when received at the
other end. Images from the
back page appear.
dirty when received at the
other end. Images from the
back page appear.
Adjust scan density.
p.32 “Image Density (Con-
trast)”
trast)”
Printed or sent image contains
spots.
spots.
The ADF or exposure glass is
dirty. Clean them.
dirty. Clean them.
Make sure that ink or correc-
tion fluid is dry before placing
originals.
tion fluid is dry before placing
originals.
“Maintaining Your Machine”,
General Settings Guide
General Settings Guide
Received image is too light.
Request the sender to increase
image density.
image density.
---
When using moist, rough, or
processed paper, the printed
image may be partly invisible.
Only use recommended pa-
per.
processed paper, the printed
image may be partly invisible.
Only use recommended pa-
per.
“Copy Paper”, General Set-
tings Guide
tings Guide
When
D appears on the dis-
play, toner is beginning to run
out. Replace the toner car-
tridge soon.
out. Replace the toner car-
tridge soon.
“
DAdding Toner”, General
Settings Guide
The machine failed to print re-
ceived fax messages.
ceived fax messages.
If this happened when the re-
ceive file indicator was lit, a
problem such as run out of pa-
per or toner might disable
printing.
ceive file indicator was lit, a
problem such as run out of pa-
per or toner might disable
printing.
p.86 “Substitute Reception”,
Facsimile Reference <Advanced
Features>
Facsimile Reference <Advanced
Features>
Store has been selected for Re-
ception File Setting. Print the
fax messages using a Web
browser or the Print Stored
RX File function.
ception File Setting. Print the
fax messages using a Web
browser or the Print Stored
RX File function.
p.122 “Printing fax informa-
tion using a Web browser”,
Facsimile Reference <Advanced
Features>
tion using a Web browser”,
Facsimile Reference <Advanced
Features>
p.34 “Printing Received and
Stored Documents”, Facsimile
Reference <Advanced Features>
Stored Documents”, Facsimile
Reference <Advanced Features>
When
B is lit, load paper into
the tray.
“Loading Paper”, General Set-
tings Guide
tings Guide
Message appears blank at the
other end.
other end.
The original was placed up-
side down. Place it properly.
side down. Place it properly.
p.13 “Placing Originals”
Both transmission and receiv-
ing are impossible.
ing are impossible.
Make sure that the modular
cord is correctly connected.
cord is correctly connected.
p.195 “Connecting the Ma-
chine to a Telephone Line and
Telephone”, Facsimile Refer-
ence <Advanced Features>
chine to a Telephone Line and
Telephone”, Facsimile Refer-
ence <Advanced Features>
The terminal adaptor setting
is incorrect. Check the setting.
is incorrect. Check the setting.
---
JptrC1FaxGBCombine_F_FM.book Page 80 Thursday, August 21, 2003 11:30 AM