Gestetner dsc525 Guía De Operación

13

This section describes how to start using this machine.

This section introduces the names and functions of the components.

(The illustration shows the ADF.)
If you load a stack of originals in the auto-
document feeder (ADF), the ADF will au-
tomatically feed the originals one by one.

Place originals face down here for copy-
ing.

If the machine does not operate after
turning on the operation switch, check
the main power switch is turned on.
See “Turning On the Power”.

Press to turn the power on (the On indi-
cator lights up). To turn the power off,
press again (the On indicator goes off).
See “Turning On the Power”.

See “1.2 Control Panel”.

Copied, printed paper or fax messages
are delivered here.

Open this cover when a paper jam occurs.

Load paper here.

Load paper here.

Heaters
In a cold place, the machine’s internal hu-
midity may become too high, making the
paper in the paper trays damp (Trays 1
and 2, and the optional lower paper
trays) and so causing printing problems.
Using the anti-condensation heaters, you
can prevent these problems.
If it is humid or cold, switch the heaters
on.

AMG048S

AthenaC1_Intro_F5-EN_FM_forPaper.book  Page 13  Sunday, March 19, 2006  1:24 PM