Gestetner dsc525 Manual Suplementario
Programs
273
7
Using a Program
Follow these steps to recall and use a registered program:
A
Make sure that the machine is in facsimile mode and the standby display
is shown.
If the standby display is not shown, press the {Facsimile} key.
is shown.
If the standby display is not shown, press the {Facsimile} key.
B
Place the original.
C
Press the {Program} key.
D
Confirm that [Recall] is selected, and press the registered program number.
The standby display appears.
The programmed fax number appears and the registered settings are recalled.
The programmed fax number appears and the registered settings are recalled.
E
Press the {Start} key.
The machine starts to scan the original.
Then, transmission starts with the recalled transmission settings.
The machine starts to scan the original.
Then, transmission starts with the recalled transmission settings.
Note
❒ Using the program causes the previous settings to be cleared.
❒ If you have no programmed destinations or scan settings as programs, se-
❒ If you have no programmed destinations or scan settings as programs, se-
lect the program number, and then enter the fax number of the destination
and select the scan settings you require.
and select the scan settings you require.
ALV019S