Gestetner dsc525 Guía De Referencia
Enhanced Network Security
144
5
H
Log off from the machine.
Enabling SSL
After installing the server certificate in the machine, enable the SSL setting.
This procedure is used for a self-signed certificate or a certificate issued by a cer-
tificate authority.
This procedure is used for a self-signed certificate or a certificate issued by a cer-
tificate authority.
A
Open Web Image Monitor.
B
Enter "http://(machine's-address)/" in the address bar to access the printer.
C
Log onto the machine.
The network administrator can log on.
Enter the login user name and login password.
The network administrator can log on.
Enter the login user name and login password.
D
Click [Configuration], under [Security], click [SSL/TLS].
The [SSL/TLS] page appears.
The [SSL/TLS] page appears.
E
Click [Enable] for [SSL/TLS].
F
Click [OK].
The SSL setting is enabled.
The SSL setting is enabled.
G
Log off from the machine.
Note
❒ If you set [Permit SSL / TLS Communication] to [Ciphertext Only], enter "ht-
tps://(machine's address)/" to access the machine.
User Settings for SSL (Secure Sockets Layer)
If you have installed a server certificate and enabled SSL (Secure Sockets Layer),
you need to install the certificate on the user’s computer.
The network administrator must explain the procedure for installing the certifi-
cate to users.
If a warning dialog box appears while accessing the machine using the Web Im-
age Monitor or IPP, start the Certificate Import Wizard and install a certificate.
you need to install the certificate on the user’s computer.
The network administrator must explain the procedure for installing the certifi-
cate to users.
If a warning dialog box appears while accessing the machine using the Web Im-
age Monitor or IPP, start the Certificate Import Wizard and install a certificate.
A
When the [Security Alert] dialog box appears, click [View Certificate].
The [Certificate] dialog box appears.
To be able to respond to inquiries from users about such problems as expiry
of the certificate, check the contents of the certificate.
The [Certificate] dialog box appears.
To be able to respond to inquiries from users about such problems as expiry
of the certificate, check the contents of the certificate.
B
On the [General] tab, click [Install Certificate...].
Certificate Import Wizard starts.
Certificate Import Wizard starts.
AthenaC1_Sec_F7-EN_FM_forPaper.book Page 144 Monday, March 20, 2006 3:07 PM