Gestetner dsc535 Guía De Operación

Copier / Document Server Features

114

This section describes the user tools in the Input/Output menu under Copier /
Document Server Features.

❖ Switch to Batch

You can select to have Batch mode or SADF mode displayed when you press
the [Special Original] key.
• Batch
• SADF

❖ SADF Auto Reset

In SADF mode, an original must be set within a specified time after the pre-
vious original has been fed.
You can adjust this time from 3 to 99 seconds in increments of 1 second.
The default setting is 5 second(s).

❖ Rotate Sort: Auto Paper Continue

Specify to continue copying when paper of the required orientation has run
out during rotatesorting.
• On

Copying continues using copy paper of a different orientation. The copy
job will finish even if you have left the machine.

• Off

When paper of the required orientation runs out, the machine stops copy-
ing and prompts you to supply copy paper. After you have loaded paper,
the machine will continue copying.

❖ Memory Full Auto Scan Restart

When memory becomes full while scanning originals, the machine can make
copies of scanned originals first, and then automatically proceed scanning re-
maining originals.
• On

You can leave the machine unattended to make copies, but sorted pages
will not be sequential.

• Off

When memory becomes full, the machine stops operation allowing you to
remove the copy pages delivered on the output tray.

❖ Letterhead Setting

If you select [Yes] in this function, the machine rotates the image correctly.
• Yes
• No
Orientation-fixed (top to bottom) or two-sided paper might not be printed
correctly depending on how the originals and paper are placed.