Gestetner dsc535 Guía De Operación

Network Settings

17

❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If

both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.

❒ [SMTP Server] and [Fax E-mail Account] must be specified in order to use the

send function.

❒ When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]

and [POP3 / IMAP4 Settings].

❒ When [SMTP Authentication] is set to [On], also make setting for [Administrator's

.

❒ [E-mail Communication Port] and [Fax E-mail Account] must be specified in order

to use the reception function.

❒ When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail

.

p.58 “Interface Settings”
p.68 “File Transfer”

This section lists the settings required for using Internet Fax with IEEE 1394 in-
terface cable
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.

Interface Settings/IEEE 1394 IPv4 Address

Neccessary

Interface Settings/IEEE 1394 DDNS Configuration

As required

Interface Settings/IEEE 1394 Host Name

As required

Interface Settings/IEEE 1394 Domain Name

As required

Interface Settings/IEEE 1394 WINS Configuration

As required

Interface Settings/IEEE 1394 IPv4 over 1394

Neccessary

Interface Settings/Network IPv4 Gateway Address

Neccessary

Interface Settings/Network DNS Configuration

As required

Interface Settings/Network Effective Protocol

Neccessary

File Transfer

SMTP Server

Neccessary

File Transfer

SMTP Authentication

As required

File Transfer

POP before SMTP

As required

File Transfer

Reception Protocol

As required

File Transfer

POP3 / IMAP4 Settings

As required