Gestetner dsc535 Guía De Operación
Connecting the Machine
30
1
Settings Required to Use Network TWAIN Scanner
This section lists the settings required for using TWAIN Scanner under the net-
work environment.
work environment.
Ethernet
This section lists the settings required for using network TWAIN Scanner with
Ethernet cable.
For details about how to specify the settings, see “Interface Settings”.
Ethernet cable.
For details about how to specify the settings, see “Interface Settings”.
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed.
❒ [LAN Type] is displayed when the wireless LAN interface board is installed.
When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
lected interface takes precedence.
lected interface takes precedence.
Reference
Menu
User Tool
Setting Requirements
Interface Settings/Network Machine IPv4 Address
Neccessary
Interface Settings/Network IPv4 Gateway Address
As required
Interface Settings/Network DNS Configuration
As required
Interface Settings/Network DDNS Configuration
As required
Interface Settings/Network Domain Name
As required
Interface Settings/Network WINS Configuration
As required
Interface Settings/Network Effective Protocol
Neccessary
Interface Settings/Network LAN Type
Neccessary
Interface Settings/Network Ethernet Speed
As required
Interface Settings/Network Permit SNMPv3 Communication
As required
Interface Settings/Network Permit SSL/TLS Communication
As required
Interface Settings/Network Host Name
As required