Gestetner dsc535 Manual Suplementario

15

Follow the procedure below to set the machine using the control panel when
loading custom size paper onto the bypass tray. 

❒ The following procedures are not required if you select [Driver / Command] from

 in [System] of [Printer Features] (see “Printer Features”,

General Settings Guide). In that case, set the paper size using the printer driver.

❒ If you select [Machine Settings] from [Bypass Tray Setting Priority] in [System] of

 (see “Printer Features”, General Settings Guide), the settings

made using the control panel have priority over the printer driver settings.

❒ If the printer driver is not used, select [Machine Settings] from [Bypass Tray Set-

 in [System] of [Printer Features] (see “Printer Features”, General Set-

tings Guide). Set paper size using the control panel.

A

Press the {User Tools/Counter} key on the control panel.

B

C

D

E

If a custom size is already set, press [Change Size].

F

Press [Vertical], enter the vertical size of the paper using the number keys,
and then press the {q} key.

G

Press [Horizontal], enter the horizontal size of the paper using the number
keys, and then press the {q} key.

H

Press [OK].
The paper sizes entered are displayed.

I

Press the {User Tools/Counter} key.
The initial screen appears.

❒ When loading OHP transparencies or thick paper, set paper size and paper type.
❒ For printer driver settings, see the printer driver Help.