Gestetner dsc535 Manual Suplementario
Preparing the Machine
48
1
Note
❒ If you do not want to install the printer when Found New Hardware Wiz-
ard starts under an operating system that supports SCSI print, disable the
device by following the procedure below.
device by following the procedure below.
A
When the [Found New Hardware Wizard] dialog box appears, click [Next >].
B
When the message “This wizard will complete the installation for this
Device: Unknown” appears, select the [Search for a suitable driver for my
device [recommended]]
Device: Unknown” appears, select the [Search for a suitable driver for my
device [recommended]]
check box, and then click [Next >].
C
When the message “Please choose your search and installation option.”
appears, clear all check boxes from [Search for the best driver in these loca-
tions.]
appears, clear all check boxes from [Search for the best driver in these loca-
tions.]
, and then click [Next >].
D
When the message “Driver Files Search Results” appears, select the [Dis-
able the device. The Add/Remove Hardware Wizard in the control Panel can be
able to complete the driver installations.]
able the device. The Add/Remove Hardware Wizard in the control Panel can be
able to complete the driver installations.]
check box, and then click [Finish].
Windows XP, Windows Server 2003
This describes how to install the printer driver to the computer with Windows
XP or Windows Server 2003 installed, using IEEE 1394 (SCSI print).
XP or Windows Server 2003 installed, using IEEE 1394 (SCSI print).
Important
❒ SCSI print must be set to “active” from the control panel. For details, see Net-
work Guide.
❒ Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
A
Connect the machine to the computer using the IEEE 1394 interface cable.
When the [Found New Hardware Wizard] dialog box appears, check that [This wiz-
ard helps you install software for: (Unknown)]
When the [Found New Hardware Wizard] dialog box appears, check that [This wiz-
ard helps you install software for: (Unknown)]
is displayed.
B
Select the [Install from a list on specific location (Advanced)] check box, and then
click [Next >].
click [Next >].
C
When the message “Please choose your search and installation option.” ap-
pears, select the [Search for the best driver in these locations.] check box, select
the [Include this location in the search:] check box, and then select the [Include
this location in the search:]
pears, select the [Search for the best driver in these locations.] check box, select
the [Include this location in the search:] check box, and then select the [Include
this location in the search:]
check box.
D
Insert the CD-ROM into the CD-ROM drive.
If Auto Run starts, click [Cancel], and then [Exit].
To disable Auto Run, press the left {Shift} key when inserting the CD-ROM
into the drive and keep it pressed until the computer finishes reading from
the CD-ROM.
If Auto Run starts, click [Cancel], and then [Exit].
To disable Auto Run, press the left {Shift} key when inserting the CD-ROM
into the drive and keep it pressed until the computer finishes reading from
the CD-ROM.