Gestetner dsm616 Guía De Información

Reception Features

46

❒ You can turn this function on or off

with the User Parameters. See p.80
“User Parameters” (switch 10, bit
1).

❒ This function uses Memory Recep-

tion.

When the size of a received message
is longer than the paper loaded in the
machine, each page of the message
can be split and printed on several
sheets, or reduced and printed on a
single sheet. For example, this func-
tion splits the message if the message
length is 20 mm (0.79") or longer than
the paper used. The message is re-
duced if it is less than 20 mm (0.79").
When a message is split, an asterix (*)
is inserted at the split position and
about 10 mm (0.39") of the split area is
duplicated on the top of the second
sheet.

❒ Your service representative can

customize this function with the
following settings:
• Reduction
• Print split mark
• Overprinting
• Overprinting length
• Guideline for split

❒ You can adjust the overprinting

and reduction lengths within the
following ranges:
• Overprinting length: 4 mm

(0.16"), 10 mm (0.39"), 15 mm
(0.59")

• Guideline for split: 5-155 mm (5

mm steps)/0.2"-6.1" (0.2" steps)

Usually the sender's Fax Header is
printed on received messages. If the
sender has not programmed their Fax
Header, you will not be able to identi-
fy them. However, if you turn this
function on, the sender's Own Name
or Own Fax Number is printed in-
stead so you can find out where the
message came from. When you re-
ceive an Internet Fax, the e-mail ad-
dress of the sender is printed.

p.59 “Initial Settings and Adjust-
ments”, Facsimile Reference <Basic
Features>

❒ You can turn this function on or off

in the User Parameters. See p.80
“User Parameters” (switch 02, bit
3).

Kir-C2-ENcombine_F_FM.book  Page 46  Wednesday, April 27, 2005  6:47 PM