Gestetner dsm616 Guía De La Red

Remote Maintenance by telnet

85

The following command can be used
to get information about the current
printer status:

❒ For more information about print

jobs is displayed when the ID
number is added after the prnlog
command.

For more information about the
meaning of the data returned us-
ing these commands, see p.103
“Understanding Displayed Infor-
mation”.

Use the “show” command to display
the network interface board configu-
ration settings.

❒ Add “-p” (as above) to have the in-

formation displayed one screen at
a time.

For more information about the
meaning of the data returned us-
ing this command, see p.108 “Con-
figuring the Network Interface
Board”.

Use the “syslog” command to display
information stored in the system log.

For more information about the
displayed information, see p.113
“System Log Information”.

Use the “snmp” command to display
and edit SNMP configuration settings
such as the community name.

❒ The 1394 interface board supports

TCP/IP only.

❒ You can configure one of ten

SNMP access settings numbered 1-
10.

❒ If you change the community

name, you must change your com-
puter settings. See p.99 “SNMP”.

❒ Default access settings 1 and 2 are

as follows:

 status

Status of printer.

Information about print 
jobs.

 info

Information about the 
paper tray, output tray, 
printer language of print-
er.

 prnlog [ID]

Lists the last 20 print jobs.

Number

1

2

Community 
name

 public

admin

IP address

0.0.0.0

0.0.0.0

Access type

read-only

trap off

read-write

trap off