Gestetner dsm635 Manual De Usuario

Troubleshooting

78

This section explains causes and remedies when copy results are not as expect-
ed.

v Basic

Copies are not stapled.

There are jammed staples 
in the stapler.

Remove jammed staples. See Gener-
al Settings Guide.

r After removing jammed staples, 

staples might not be ejected the 
first few times you try to use the 
stapler.

The number of copies ex-
ceeds the capacity of the 
stapler.

Check the stapler capacity. See p.108 
“Staple”. 

Copy paper is curled.

Turn the copy paper over in the 
tray.

Staples are wrongly posi-
tioned.

Originals are not set cor-
rectly.

Check the correct position to place 
the originals. See p.35 “Staple”. 

You cannot combine sever-
al functions.

Selected functions cannot 
be used together.

Check the combination of functions 
and make the settings again. 

When sorting, the pages 
are divided into two 
blocks.

The memory became full in 
the middle of sorting and 
the pages were delivered in 
two blocks.

You can interrupt copying when the 
memory becomes full. See p.101 
“Memory Full Auto Scan Restart”. 

Paper does not output dur-
ing printing with stapling.

When you stop printing 
while using the staple func-
tion, papers not stapled 
during printing may be left 
in the staple unit.

Press the {Reset} key and cancel 
copy settings, including stapling.