Gestetner dsm725e Guía De La Red

Using NetWare

23

• Job Timeout: When the interface board is used as a NetWare remote print-

er, the printer cannot detect when a print job ends. Therefore, the printer
terminates printing when a certain period of time has elapsed since it last
received print data (i.e., when it has not received print data for a certain pe-
riod of time). Specify here this period of time (3 to 255 seconds). The initial
value is 15 (seconds).

• Frame Type: Select the frame type from the drop-down menu.
• Print Server Protocol: Select the protocol for NetWare from the drop-down

menu.

• NCP Delivery Protocol: Select the protocol for NCP delivery.

G

Confirm the settings, and then click [Apply].
Configuration is now complete. Wait several before restarting Web Image
Monitor.

H

❒ To check the configuration is correct, enter the following from the com-

mand prompt:

❒ If the printer works as configured, the name of the print server appears as

a connected user.

❒ If you cannot identify the printer you want to configure, check the printer

name against the configuration page printed from the printer. For details
about printing a configuration page, see “Printer Reference”. 

❒ If no printer names appear in the list, match the frame types of IPX/SPXs

for the computer and printer. Use the [Network] dialog box of Windows to
change the frame type of the computer.

Follow the procedure below to connect the machine as a print server using Net-
Ware 4.x, NetWare 5 / 5.1, or NetWare 6 / 6.5.

❒ When using the printer as a print server in NetWare 4.x, NetWare 5 / 5.1, or

NetWare 6 / 6.5, set it to the NDS mode.

❒ When using NetWare 5 / 5.1 or NetWare 6 / 6.5, set the printer as a print server.

A

B

C