Gestetner dsm725e Guía De La Red
Remote Maintenance by telnet
75
2
❖ Deleting Computer Name
msh> smb clear comp
❖ Deleting Group Name
msh> smb clear group
❖ Deleting Comment
msh> smb clear comment
❖ View Protocol
msh> smb protocol
snmp
Use the “snmp” command to display and edit SNMP configuration settings such
as the community name.
as the community name.
❖ View settings
msh> snmp
• Default access settings 1 is as follows:
Community name:public
IP address:0.0.0.0
IPX address:00000000:000000000000
Access type:read-only
Effective Protocol:IP/IPX
IP address:0.0.0.0
IPX address:00000000:000000000000
Access type:read-only
Effective Protocol:IP/IPX
• Default access settings 2 is as follows:
Community name:admin
IP address:0.0.0.0
IPX address:00000000:000000000000
Access type:read-write
Effective Protocol:IP/IPX
IP address:0.0.0.0
IPX address:00000000:000000000000
Access type:read-write
Effective Protocol:IP/IPX
• If “-p” is added, you can view settings one by one.
• To display the current community, specify its registration number.
• To display the current community, specify its registration number.
❖ Display
msh> snmp ?
❖ Community name configuration
msh> snmp “number” name “community_name”
• You can configure ten SNMP access settings numbered 1-10.
• The printer cannot be accessed from SmartDeviceMonitor for Admin or
• The printer cannot be accessed from SmartDeviceMonitor for Admin or
SmartDeviceMonitor for Client if “public” is not registered in numbers 1-
10. When changing the community name, use SmartDeviceMonitor for
Admin and SNMP Setup Tool to correspond with printer settings.
10. When changing the community name, use SmartDeviceMonitor for
Admin and SNMP Setup Tool to correspond with printer settings.
• The community name can be entered using up to 15 characters.