Gestetner dsm725e Guía De La Red

Getting Printer Information over the Network

87

This section explains details of each item displayed in the printer status and in-
formation.
This manual covers all models, and therefore contains functions and settings
that may not be available for your model.

The printer status can be checked using the following commands:
• UNIX: Use the “lpq” command and “rsh”, “rcp”, and “ftp” parameters. 
• mshell: Use the “status” command. 

Access Restricted

The job was canceled because user have no authority. 

Add staples (Booklet: Back)

The staple of booklet finisher (back) is exhausted. 

Add staples (Booklet: Both)

The staple of booklet finisher is exhausted. 

Add staples (Booklet: Front)

The staple of booklet finisher (front) is exhausted. 

Adjusting...

The machine is initializing or calibrating. 

Call Service Center

There is a malfunction in the machine.

Canceled

The job is reset. 

Canceling Job...

The job is being reset. 

Card/Counter not inserted

The machine is waiting for prepaid card or key.

Coin or amount not inserted

The machine is waiting for coin to be inserted.

Coin/Key Counter not inserted

The machine is waiting for coin or key counter.

Configuring...

Setting is being changed. 

Cooling Down Fusing Unit...

The fusing unit is cooling down.

Cover Open: ADF

The document feeder is open. 

Cover Open: Bridge Unit Left

The cover of the left bridge unit is open.

Cover Open: Bridge Unit Right

The cover of the right bridge unit is open.

Cover Open: Duplex Unit

The cover of the duplex unit is open. 

Cover Open: Finisher

The cover of Finisher is open. 

Cover Open: Finisher Front

The front cover of Finisher is open. 

Cover Open: Finisher Rear

The cover of the rear finisher is open.

Cover Open: Finisher Upper

The upper cover of Finisher is open. 

Cover Open: Front Cover

The front cover is open. 

Cover Open: Lower Right Cover

The lower right cover is open.