Gestetner dsm725e Guía De Operación
11
1. Getting Started
This section describes how to start using this machine.
Guide to Components
This section introduces the names and functions of the components.
1.
Exposure glass cover (optional) or
Auto Document Feeder (ADF) (optional)
Lower the exposure glass cover over
originals placed on the exposure glass. If
you have the ADF, load a stack of origi-
nals here. They will be fed automatically,
one by one.
(The illustration shows the ADF.)
originals placed on the exposure glass. If
you have the ADF, load a stack of origi-
nals here. They will be fed automatically,
one by one.
(The illustration shows the ADF.)
2.
Exposure glass
Place originals face down.
3.
Internal tray
Copied, printed paper or fax messages
are delivered here.
are delivered here.
4.
Ventilation holes
Prevents overheating. Do not obstruct
the ventilation holes by placing anything
near it or leaning objects against it. If the
machine overheats, a fault might occur.
the ventilation holes by placing anything
near it or leaning objects against it. If the
machine overheats, a fault might occur.
5.
Main power switch
If the machine does not operate after
turning on the operation switch, check
the main power switch is turned on. If it
is off, turn it on.
turning on the operation switch, check
the main power switch is turned on. If it
is off, turn it on.
6.
Main power indicator
This indicator lights when the main pow-
er switch is turned on, and goes off when
the switch is turned off.
er switch is turned on, and goes off when
the switch is turned off.
AHR034S