Gestetner dsm725e Guía De Operación

Appendix

56

❒ When loading paper in the paper tray 1-4 and the LCT, place the copy side of

the paper face up.

❒ When loading paper in the bypass tray, place the copy side of the paper face

down.

❒ When using the bypass tray, it is recommended to set the paper orientation to

L.

❒ Do not use paper for inkjet printers.
❒ When you use OHP transparencies, fan them for each use.
❒ If multiple sheet feeding occurs, load sheets one by one.
❒ If you load paper of the same size in the same orientation in two or more

trays, the machine automatically shifts to the other tray when the first tray in
use runs out of paper. This function is called Auto Tray Switching. (However,
if the Paper Type of one tray is recycled or special paper, the settings of the
other trays must be the same for Auto Tray Switching to work.) This saves in-
terrupting a copy run to replenish paper when making a large number of cop-
ies. See “Selecting Copy Paper”, Copy/Document Server Reference and
“Copier / Document Server Features”, General Settings Guide.

❒ The paper types you can select in System Settings are only general classifica-

tions. Copy quality for every kind of paper in a classification is not guaran-
teed. See “Unusable Paper” for more information.

This section describes which types of paper are unusable on this machine.
R CAUTION:

❒ Do not use any of the following kinds of paper or a fault might occur:

• Paper for inkjet printers
• Thermal fax paper
• Art paper
• Aluminum foil
• Carbon paper
• Conductive  paper
• OHP transparencies for color copying
• Paper with perforated lines
• Hemmed paper

• Do not use aluminum foil, carbon paper, or similar conductive paper to avoid