Gestetner f104 Guía De Operación
Other Transmission Features
56
3
Duplex Original Settings
This feature lets you scan in each side
of a two-sided original, and then have
both sides sent in a single operation.
of a two-sided original, and then have
both sides sent in a single operation.
Preparation
You need to assign the Duplex
function to a User Function key be-
forehand. See p.105 “User Func-
tion Keys”.
function to a User Function key be-
forehand. See p.105 “User Func-
tion Keys”.
Limitation
❒ This feature is only available with
Memory Transmission.
Note
❒ You cannot send duplex originals
using Parallel Memory Transmis-
sion.
sion.
AAAA
Make sure the Memory Transmis-
sion indicator is lit.
sion indicator is lit.
Note
❒ If it is not, press the {{{{Memory
Trans.
}}}} key.
BBBB
Press the User Function key (
{{{{F1}}}}
to
{{{{F10}}}} ) with the Duplex func-
tion programmed in.
CCCC
Place the two-sided original with
the front page face-up.
the front page face-up.
DDDD
Select any scan settings as neces-
sary.
sary.
EEEE
Dial the destination number.
FFFF
Press the
{{{{Start}}}} key.
Scanning of the front page begins.
When scanning has finished, the
following display appears.
When scanning has finished, the
following display appears.
GGGG
Place the original with the back
page face-up.
page face-up.
Note
❒ Adjust the original so that the
back page is scanned in the
same direction as the front page
was scanned in.
same direction as the front page
was scanned in.
❒ Set the document within 60 sec-
onds. If time runs out, an error
will occur and transmission will
not take place.
will occur and transmission will
not take place.
HHHH
Press the
{{{{Start}}}} key.
Scanning of the back page begins.
When scanning is finished, trans-
mission starts.
When scanning is finished, trans-
mission starts.
If the number of back pages and front
pages are different
pages are different
AAAA
When the number of back pages
and front pages are different, the
following display appears.
and front pages are different, the
following display appears.
BBBB
Press the
{{{{OK}}}} key.
When transmitting the stored
pages
pages
A Press 0
0
0
0 or 1
1
1
1 to select “Trans-
mit”, and then press the
{{{{OK}}}}
key.
Note
❒ Successfully scanned pages
are sent. Check the number
of transmitted pages on the
Communication Result Re-
port.
of transmitted pages on the
Communication Result Re-
port.
StellaF2_EN_Combine_F_FM.book Page 56 Friday, February 14, 2003 5:16 PM