Gestetner f104 Guía De Operación

Printing Functions

83

❒ You can adjust the overprinting

length and length of reduction
within the following ranges:
• Guideline for split: 0 - 155 mm

(0 - 6.1 in.)

Usually the sender's Fax Header is
printed on received messages. If the
sender has not programmed their Fax
Header, you will not be able to identi-
fy them. However, if you turn this
feature on, the sender's Own Name or
Own Fax Number programmed by
the sender is printed instead so you
can find out where the message came
from. 
• TSI = Transmitting Subscriber

Identification 

❒ You can turn this function on or

off with the User Parameters.
See p.146 “User Parameters”
(switch 02, bit 3).

You can economize on toner by ad-
justing the image density used when
generating all printed output (Output
Density), or just for incoming faxes,
reports, and lists (Toner Saving).

Use this feature to save over 50% of
the toner normally used for printing
incoming faxes, reports, and lists.

❒ This feature does not apply to cop-

ies or prints made with the printer
option. However, the optional
printer interface unit has its own
toner saving function.

❒ When receiving faxes sent using

Photo (Halftone) mode from this
maker's machines, turn Toner Sav-
ing off.

❒ When Toner Saving is turned on,

printed images will come out light-
er than usual. To check on the im-
age quality, print out the User
Parameter List. See p.156 “Printing
the User Parameter List”. 

❒ If the other party sends you a fax

using the Photo (Halftone) mode,
the printed fax image may differ
from the document image.

❒ You can turn Toner Saving on or

off with the User Parameters. See
p.146 “User Parameters” (switch
12, bit 2).

StellaF2_EN_Combine_F_FM.book  Page 83  Friday, February 14, 2003  5:16 PM