Gestetner f104 Guía De Operación

Other Transmission Features

62

If dirt is stuck to the scanner, the other
party receives fax messages with
black lines. When the scanner is dirty,
the warning message "

Clean Con-

tact Glass and White Strip

" is

displayed after scanning is complete.
If this message is displayed, wipe the
contact glass and white strip to re-
move the dirt, and then press the

{{{{OK}}}} key.

❒ You can select whether this mes-

sage is displayed or not when the
machine detects that the scanner is
dirty with the User Parameters.
"On" (Displayed) is selected by de-
fault. See p.146 “User Parameters”
(switch 20, bit 7).

❒ If the dirty part of the scanner is

small, that is, 0.127 mm (0.005 in.)
or smaller, the machine tries to
erase the black line made when
scanning originals. The black line
is less visible on the received mes-
sage. However, sometimes very
small parts of the image might be
missing on the received message.
You can turn this function on or off
with the User Parameters. It is
turned on by default. See p.146
“User Parameters” (switch 20, bit
4).

❒ Transmission is not interrupted

even if the machine detects that the
scanner is dirty.

When turned on, this feature sends a
backup copy of all faxes you send to
destinations that you specify.

You must specify the backup desti-
nations beforehand. See p.140
“Backup File Transmission Set-
tings” .

❒ This function works with the fol-

lowing features:
• Memory Transmission 

See p.34 “Memory Transmis-
sion”,  Basic Features.

• Transfer Request Transmission 

See p.20 “Transfer Request”.

• Confidential Transmission

See p.7 “Sending Confidential
Messages”.

• SUB Code Transmission

See p.11 “SUB Code Transmis-
sion”.

• Mail Transmission (NIC FAX

unit (Option for Type1) re-
quired)

StellaF2_EN_Combine_F_FM.book  Page 62  Friday, February 14, 2003  5:16 PM