Gestetner f104 Guía De Operación
Other Transmission Features
68
3
Printed Reports
File Reserve Report (Memory
Transmission)
Transmission)
This report is printed after a docu-
ment is stored in memory. It helps
you review the contents and regis-
tered destinations of documents
stored for transmission.
ment is stored in memory. It helps
you review the contents and regis-
tered destinations of documents
stored for transmission.
Note
❒ This report is not printed for mes-
sages sent using Parallel Memory
Transmission. See p.67 “Parallel
Memory Transmission”.
Transmission. See p.67 “Parallel
Memory Transmission”.
❒ You can turn this report on and off
with the User Parameters. By de-
fault it is not printed. See p.146
“User Parameters” (switch 03, bit
2).
fault it is not printed. See p.146
“User Parameters” (switch 03, bit
2).
❒ Even if the machine is set up not to
print this report, it is still printed if
a document could not be stored.
a document could not be stored.
❒ You can choose whether to print
the document image on the report
(part of the image is printed by de-
fault). This feature is not available
for Confidential Transmission. See
p.146 “User Parameters” (switch
04, bit 7).
(part of the image is printed by de-
fault). This feature is not available
for Confidential Transmission. See
p.146 “User Parameters” (switch
04, bit 7).
❒ With the User Parameters, you can
set the machine to print out this re-
port when scanning documents is
interrupted because the machine's
memory runs out, or if a paper jam
occurs. See p.146 “User Parame-
ters” (switch 04, bit 6).
port when scanning documents is
interrupted because the machine's
memory runs out, or if a paper jam
occurs. See p.146 “User Parame-
ters” (switch 04, bit 6).
Communication Result Report
(Memory Transmission)
(Memory Transmission)
This report is printed when a Memo-
ry Transmission is completed, so you
can check the result of the transmis-
sion. If two or more destinations are
specified, the report is printed after
the fax message has been sent to all
the destinations. If the machine is set
up not to print this report and the fax
message could not be successfully
transmitted, the Communication Fail-
ure Report is printed. See p.69 “Com-
munication Failure Report” .
ry Transmission is completed, so you
can check the result of the transmis-
sion. If two or more destinations are
specified, the report is printed after
the fax message has been sent to all
the destinations. If the machine is set
up not to print this report and the fax
message could not be successfully
transmitted, the Communication Fail-
ure Report is printed. See p.69 “Com-
munication Failure Report” .
Note
❒ You can print the Journal to check
the communication result. See p.40
“Printing the Journal”.
“Printing the Journal”.
❒ You can turn this report on and off
with the User Parameters. See
p.146 “User Parameters” (switch
03, bit 0).
p.146 “User Parameters” (switch
03, bit 0).
❒ You can program a User Function
key to switch Communication Re-
sult Report printing on or off for
each transmission. After the trans-
mission is completed, the setting
reverts to the setting made with
the User Parameters. When the
User Function key is lit, the report
is printed for each transmission.
See p.105 “User Function Keys”.
sult Report printing on or off for
each transmission. After the trans-
mission is completed, the setting
reverts to the setting made with
the User Parameters. When the
User Function key is lit, the report
is printed for each transmission.
See p.105 “User Function Keys”.
❒ You can choose whether to include
print the document image on the
report (the image is printed by de-
fault). This feature is not available
for Confidential Transmission. See
p.146 “User Parameters” (switch
04, bit 7).
report (the image is printed by de-
fault). This feature is not available
for Confidential Transmission. See
p.146 “User Parameters” (switch
04, bit 7).
StellaF2_EN_Combine_F_FM.book Page 68 Friday, February 14, 2003 5:16 PM